Pressure Cleaning | Sydney Wide Pressure Cleaning

Pressure Cleaning Tips for Removing Grease

pressure cleaning, pressure washing No Responses »

Feb 272011

Removing grease especially from concrete surfaces is a very tough task that can be alleviated by pressure cleaning. Using a powerful pressure cleaner with a steam unit is the best way to remove the most stubborn grease spot but even a normal cold water or hot water cleaner will do an efficient job if used with the right cleanser.

Pressure cleaning units release water at high pressure to remove substances ranging from dirt to grease off various surfaces. Pressure washing can be used with different pressure levels for removing different deposits. For removing grease a washer with a high pressure level has to be used as grease adheres to the surface and is difficult to get rid off. To make the task even easier a hot water pressure washer should be used. But if the grease deposit is really very tough then you should go for a steam pressure washer.

Methods of Pressure Cleaning Grease

1. Degreasing with a Steam Pressure Cleaner: This is a very simple process. The combined power of steam and high pressure created by the machine is enough to remove most grease deposits. To get the maximum benefits out of a steam pressure washer the nozzle should be held as close to the surface as possible. Steam pressure cleaners are generally used in industrial and commercial establishments.

2. Degreasing with Hot Water Cleaner: For domestic use a hot water pressure cleaning unit is ideal for removing grease. A hot water cleaner can be used in the following ways:

o Pour a bottle of coke, baking soda, detergent or a degreaser like Benzene on the grease spot and leave it overnight. The next morning, wash off the area with hot water released at high pressure. This should remove the grease.

o For very tough grease marks you can use muriatic acid. This is a very strong chemical, so be very careful while using it. Put on proper protective clothing and follow the instructions diligently. Pour the acid on the spot, leave it for some time so that it soaks in and wash it off thoroughly. For this use hot water at very high pressure. This is one of the more effective ways of pressure cleaning grease.

3. Pressure Washing with Green Chemicals: Cold water is normally not used to remove grease. This is because cold water stiffens the grease and it becomes very hard to remove it even with water at very high pressure. But by using green chemicals you can remove grease spots even with cold water. The chemical should be put into the pressure washing unit to form a solution with the water and the spot washed with either cold or hot water at very high pressure. The green chemical solution penetrates into the grease and changes the structure of the molecules in such a way that the altered molecules repel each other and the sticky quality of grease gets eliminated. These chemicals make pressure cleaning very easy and increase the efficiency of pressure cleaners. Moreover, this process is economical and is an environment friendly way to remove stubborn grease stains.

Pressure cleaning is by far the best way to keep your entire household clean and is especially effective in removing tough oil and grease stains.

3 Tips for Pressure Cleaning your Siding Effectively

pressure cleaning, pressure washing No Responses »

Jan 182011

Pressure cleaning is possibly the best way to get rid of all the grime and dust and other particles from the vinyl sidings of your house. This is a very efficient and fast method if done properly but could harm the sidings if proper care is not taken. Tget the job done right you simply have to follow a few tips.

Equipment and preparation

The only equipment required for pressure washing your vinyl sidings is a power cleaner with the proper grading. This you can either buy from a reputed dealer or better still you can hire one from the many companies that lend these cleaners. Once you have obtained the machine go to a home improvement store and get a detergent and also chemicals if necessary for your pressure cleaning. The next step would be to remove all potted plants and cover up those that you cannot remove in the vicinity of the sidings. Ensure that all electric bulbs and shades are also removed and fixtures that cannot be removed are properly covered.

Precautions

Almost all pressure washers have hot water generating facilities. For pressure washing vinyl sidings you should be very careful to keep the temperature below 120°F. If the water released by the machine gets too hot it will buckle and warp the vinyl sidings and you will be in real trouble. So be very careful to keep the temperature in check. Maintaining proper pressure is also very important in pressure cleaning vinyl sidings. To check the pressure, direct the nozzle at a spot on your wall and adjust the pressure so that it is enough to clean the sidings and does not warp or break them. Start at a very low pressure and gradually increase it to the required level. Keep a watch out to see that water is not trapped between the siding boards by spraying it very evenly.

Washing

Fix the proper nozzle and set the water pressure on the power washer to minimum. Wet the sidings you are preparing to clean. Take a hard brush and scrub the excessively dirty areas. Next, put the detergent and chemicals into the dispenser in the cleaner and begin the actual process of pressure cleaning. Set the pressure at the required level and start washing away all the dirt and grime for the sidings. Stand a few feet away from the sidings when you use the power cleaner. Ensure that the entire area is washed evenly. To get rid of debris that might have collected between the siding boards, increase the water pressure slightly and concentrate the spray on the required area. Finally, shut out the detergent dispenser, set the pressure at a very low level and rinse the entire area thoroughly. Make sure that there is no detergent or chemical residue on the sidings.

In case you are planning on giving the vinyl sidings a fresh coat of paint, follow the above steps and after you complete pressure cleaning leave the sidings uncovered for some time before you start painting.

5 Tips for Pressure Cleaning your Driveway

pressure cleaning No Responses »

Dec 172010

Your driveway is one area that is frequented by your car and by people at least over three or four times a day. Moreover, it is also subject to all kinds of weather conditions. Pressure cleaning your driveway, therefore, becomes an inevitable need. You may have more than one car and the constant dirt, grime and wear and tear that your driveway is subjected to, make it dirty. Over a period of time, it will start losing its original charm and start looking drab. You may not want to witness such a scene and to prevent this; you need to clean your driveway periodically.

Your set of wheels can carry grease, oil, sand, dirt, mud and much more than your mind can imagine and set them on your driveway. Some stains can be removed by a general clean over session while other kinds of stains that are tougher require pressure cleaning. You could choose to have brick, cemented or concrete pavers on your driveway. Each of these requires a specific handling procedure when it comes to pressure washing. You may choose to do the cleaning yourself or employ a professional cleaning services company that can handle almost any kind of cleaning.

Before you begin the process of pressure cleaning your driveway, there are a few tips that you may need to bear in mind and these are enumerated below:

Remove all things that could be a dispensable part of your driveway such as cars, plants, kids’ toys, litter etc. Remove all excessive oil or grease stains by scattering cat litter or sawdust and leaving them overnight. You can use a stiff broom or a push broom in the morning to sweep the area clean in the morning.

It is recommended to use a decent pressure washer and apply a moderate pressure of 3000 psi. Concrete driveways will require this amount of pressure. Hot water washing is ideal since it can clean 5 times better than cold water. You can choose to rent a pressure washer from your neighborhood hardware store. Do not connect your cold water pipe for hot water since the pipe has all the chances of getting damaged.

Do not forget to read the manual of the pressure washer if you intend pressure cleaning yourself. For a hot water pressure washer, ensure that the burner fuel tank is filled. Blue tank indicates diesel or kerosene and a red tank indicates gasoline. You need to be completely aware of the probable hazards of using a pressure washer and abide by the safety precautions.

Use a suitable cleaning agent when you pressure wash. Apply the solution directly on the surface and liberally on areas that require more attention. Turbo nozzle on your pressure washer is ideal for removing grease and oil stains.

When you are done with cleaning, you need to rinse off the driveway completely and especially those items (garage door etc) where chemicals may have splashed.

Pressure cleaning is a simpler and smarter method of cleaning. If you understand the process of cleaning, it can work wonders for your driveway.

3 Tips for Cleaning your Roof Using Pressure Cleaners

pressure cleaners, pressure cleaning No Responses »

Nov 232010

Usually, when we think of house washing, most of us ignore cleaning roofs. This could be attributed to the fact that the roofs are not always frequented, neither by homeowners nor by the guests, so we feel that it is an utter waste of time and money to clean up the area. Consider a situation where you are having a party at home and need a lot of space for your guests. Will you not then make use of your roof?

Apart from simply putting up a better image of yourself and your home, cleaning of the roof is also required to prevent any leakages. A roof can leak due to the effects of the various weather elements like the wind and the rain. Pressure washing is the option you need to choose when you are looking forward to cleaning the roof of your house. High pressure cleaning can successfully remove mosses and algae and leave your roof totally immaculate. Cleaning of your roof therefore is extremely essential and below are listed a three tips on how to do it right.

Select the right pressure washer: You need to very carefully select the kind of power washer you will be using for your roof. Normal or regular pressure cleaners can work just fine. Before using them though, try them on a small segment of the roof. If the resultant effect is satisfactory, then you can carry on with it on the rest of the area. Before getting on with it you have to take care that you cut away all the overhanging tree branches if any, so that the roof is exposed to a lot of air and sunlight. Also make sure that the mouths of the drains and gutters are not covered with any form of debris. In case there is some form of rubbish accumulating at the mouth, clear it immediately for the smooth drainage of water.

Choose the right chemical: For the wellbeing of the roof of your house, it is mandatory that you pick the cleaning chemical after a lot of consideration. The chemicals used in pressure cleaners for high pressure cleaning usually contain bleach. The bleach is a harmful agent for the walls of the roof because it discolors them. Hence try and go for an eco friendly cleaning agent. Power washing chemical of superior quality can reduce the time of the process and be effective too. The area must be rinsed with freshwater after the cleaning is over.

Be safe: During high pressure cleaning, the pressure cleaners need to be handled with extreme care. Pressure washers can prove to be very dangerous if they are not handled with precaution. The highly pressurized water has the capacity of causing immense amount of injury and so you need to handle it in a suitable way as to avoid any such accidents. Do not let kids be around when you are cleaning your roof. The wisest step you can take is to hire a professional pressure cleaner who can do the job for you.

What are the Different Types of Pressure Cleaners?

pressure cleaners, pressure cleaning No Responses »

Oct 142010

The high-powered pressure cleaners savagely and systematically pummel the dirt to submission in their bid to cleanse the surfaces and objects. These cleaners let loose water from nozzles at very great pressure, which is measured in pounds per square inch. For use in different applications, these pressure sprays are available now in different capacities of pressure. While the pressure spray for home application may come with a pressure capacity of 1000psi, the commercial pressure cleaners are available even up to a range of 4000psi. The availability of pressure sprays are based also on the mode of operation and the type of solvents it uses.

Electric pressure cleaners

The home-application pressure cleaners generally are electricity based and these cleaners are used for cleaning not so rigorous remnants of muck and dirt. The electrical pressure sprays are capable of generating pressure in the range of 1000 psi to 2000 psi, sufficient for use in the household. The advantage of the electrically operated devices is that they are easily portable being light in weight. They also need less of maintenance than the gas-based models.

Gas-based cold water pressure cleaners

Gas-based cold water pressure cleaning is also used to clean dirt of low intensity. The advantage of gas over electricity is their capability to handle jobs uninterruptedly, making it the right choice for commercial applications. The pressure generated at the point of release of water is also about twice that of the electrical cleaners. The heavy-duty gas based cleaners based on the capacities are available in the price range between $200 and $10,000. The gas-based models are typically used for outdoor applications and are recommended for use by trained hands only.

Gas-based hot water pressure cleaners

The gas-based hot water pressure washers are strictly used for industrial and commercial applications, where you need to remove the petroleum-based stains from different surfaces. These hot water models of pressure sprays are the costliest of the pressure cleaners, but are preferred by professional pressure cleaning services for their high-efficiency.

Gas-based chemical pressure cleaners

To remove forms of permanent defacement like graffiti, special chemicals are also employed in gas-based models of pressure cleaners. The feature of the commercial gas-based pressure washers is that they not only clean the surfaces that are smeared with high-intensity dirt, quickly, but they do so using the minimal water.

Direct drive pressure cleaners

The pressure in the pressure spray is created by the built-in pumps. The pressure sprays are hence based also on the type of drive employed by the pumps. In the direct drive models the pumps are mounted directly on the motors, making it compact, light weight and lower in price.

Belt drive pressure cleaners

The advantage of the belt driven mechanism is that here the vibrations are lower making the pumps more durable. However the disadvantage here is that there is a need for constantly replacing belts due to wear and tear.

Knowledge of the types of the pressure cleaners would be useful in sourcing the right type of cleaner to suit your requirement. The cleaners are also available for short-term rent so as not to block your valuable investments on a device that is sparingly used. The other more convenient option open is to hire the services of professional cleaning agencies for the job. The added advantage here is that you need not worry about using the pressure spray safely.

Tips To Wash the Fence with Pressure Cleaners

pressure cleaners, pressure cleaning 1 Response »

Sep 102010

Fences made of any material can be washed rapidly and much efficiently with pressure cleaners. It is essential to have a clear-cut plan, use the right technique and proper cleaning agents to derive maximum benefit from pressure cleaning the fence.

All fences cannot be cleaned in the same manner as the cleaning material, bleach and detergent used vary according to the material of the fence. The bleach, detergent and water should be mixed in the correct proportion as per instructions given on the label of the product. This can be sprayed on to the fence using a garden hose or poured into the reservoir of pressure cleaners.

It is important to check whether there is a proper drainage system that will provide an outlet for the water that is used during pressure cleaning. Wooden fences should never be cleaned with hot water. Metal fences can be cleaned with hot water but the recommended PSI should be known and pressure cleaners suitably adjusted accordingly for best results.

Exposure to sun lightens the color of the fence and drenching in rain causes a wooden fence to swell and the nails loosen up. The nails should be removed and the surface scraped with a sandpaper to remove any grime, mold or dirt. The surrounding area should be covered with tarpaulin and the nearby plants and trees should be adequately protected before using pressure cleaners to wash the fence.

Fences are exposed to the vagaries of nature and therefore mold, mildew, algae, dirt and graffiti accumulate over a period of time. Recommended detergent and bleach should be used while cleaning a fence. Along with these a cleaning agent that is preferably non-bleach based should be used to restore the original color and brightness.

Fences of various materials have to be cleaned at various pressure levels and the appropriate PSI should be known before starting the work. The cleaning should be done from top down covering small areas at a time.

Splinters or chips of wood might fly off due to the pressure of the water and cause injuries. Therefore it is important to maintain a safe distance from the fence during pressure cleaning. The person operating the machine should wear protective gloves and appropriate dress to avoid any injury.

Protective eyewear should be worn during pressure cleaning. Before switching on the machine check whether the attachments are all tight and in place. Any loose accessories might act as projectiles and cause serious injuries. It is always recommended to start with a low pressure and gradually increase to the recommended pressure level as you progress.

Stone, brick or concrete fencing is relatively easy to clean compared to wooden, metal, cedar or vinyl fencing. Arrangements should be made to clean both sides of the fence. Children and pets in the house should not be allowed into the vicinity while using pressure cleaners. It would be in your best interest to intimate your neighbor before starting the cleaning process to avoid any problems later.

Opt For Superior Environment Friendly Driveway Cleaning Service

driveway cleaning, pressure cleaning 1 Response »

Aug 162010

Some of us keep our homes very clean and spend a fortune on house cleaning services. But we tend to neglect an important part of the house – our driveway! This could be because whenever we are at home our car is kept on the driveway preventing cleaning and when we drive the car out we don’t get to see the dirt. But building up of dirt, algae and mildew can damage the floor of the driveway and make it very slippery, especially if kids are prone to playing in the drive. A dirty driveway also gives an unkempt look to the house as it is the first thing that we see when we drive over.

Our Professional Driveway Cleaning Service

Sydney wide pressure cleaning offers professional cleaning service of your driveway at very reasonable rates. Our cleaners are committed and treat every home like their own. They go out of their way to ensure that your driveway is as clean as possible and this lasts for a long time. So along with regular cleaning one ought to resort to professional cleaning for a thorough cleaning that stays for long.

A special feature that sets us apart is that we use only environment friendly solutions and high pressure water jets for all driveway cleaning purposes. We care for the environment and would like to keep it green forever. We have found and proved that contrary to popular belief, harsh abrasives only help in instant cleaning that is effortless but is not long lasting. Moreover the harsh chemicals can cause irreparable damage to the floors. Our pressure cleaning technique using high pressure water jets is absolutely environment friendly and the cleaning agents used by us are soap and detergents that shine up the floor without damaging it.

Our Driveway Cleaning Procedure is Thorough and Safe

We use solution or detergents to scrub the floor area. This is necessary to break the bonds between the dirt, algae or mildew and the floor. We employ the age old tried and tested technique of scrubbing with the hand. This helps to agitate the solution better and helps us to reach all areas, even the difficult corners. Using the hand makes it possible to know where to apply pressure and how much.

After proper agitation the foam lather is spread out all over the floor and left for a few minutes to activate it. Then high pressure water jets are used with precision to dislodge all dirt particles and other growths. This is especially effective in dislodging dirt stuck within the tile joints and the wedges. The detergent is also cleaned till nothing remains of it. The procedure leaves the floor sparkling clean. Even oil stains and grease marks can be removed effectively in this process.

Sydney wide pressure cleaning service is just a phone call away. Call us today to get a quote for your driveway cleaning. Our representative will be happy to assist you. Our costs are affordable and we never compromise on quality cleaning.

High Pressure Driveway Cleaning – Sprucing Up Your Driveway

driveway cleaning, pressure cleaning No Responses »

Jun 202010

Does your driveway resemble something out of an old black and white movie – too terrible to even imagine? Well, that may be a bit of an exaggeration but be honest, does your driveway need sprucing up? Most of us spend a lot of time and money on doing up the interior of the home and on maintaining it to a very high standard. However, we are sadly negligent when it comes to the exterior surfaces of the property and driveways always bear the brunt of this neglect.
Sydney Wide Pressure Cleaning has just the solution you are looking for. The company provides excellent services that include: pressure washing, driveway cleaning, brick cleaning, cleaning of patio, pool surround, fences, pavers cleaning and so much more.
Since there is not enough space to detail all of these wonderful services let us focus on driveway cleaning; one of the most overlooked of all external cleaning needs. Do you often feel that a good hosing down and drying out in bright sunshine is all it takes? You couldn’t be more wrong.
If you are still not convinced and have questions you want answers to, go ahead and keep reading.
Do you want to know how pressure washing can clean your driveway when it looks as bad as a mechanics workshop?
Pressure cleaning or pressure washing is not just using water at high force to hose down the exterior surfaces. It involves the use of specialized cleaning techniques that qualified and trained people will perform on your property. All of the oil stains, marks, slippery algae and moss, weeds and other debris will be cleaned right off the driveway for you.
Do you remember how the driveway looked when you first bought the property? Well the company promises to give you back your driveway in pristine condition and that’s no joke. As a company, pride is taken in the excellent results produced by the pressure washing services rendered.
Are you wondering how pressure cleaning will get rid of the algae you have been trying to blast off for simply ages?
In simple terms it’s what the company specializes in doing. As part of the specialized cleaning treatment the algae, moss, mildew and other bacteria are cleaned out at root level to get rid of them completely. Simply blasting them with water is only a temporary solution because they will come back to re-infest the very same spot.
Well, what about stubborn oil stains? So you are still not convinced! A special formula detergent is used to first lift the most stubborn oil stains from the surface. This process is repeated as many times as it takes to get the oil out. The area is then cleaned by the pressure washing method to get rid of all other algae and dirt giving the entire driveway a uniformly clean, new look.
The most important question of all – what’s it going to cost? Well as mentioned before, your driveway is probably the most neglected part of your beautiful property. However, this is one of the most affordable of all services and the price will simply astound you. Go ahead and check out the affordability of driveway cleaning.

Sydney Wide Pressure Cleaning

61 Shepherds Rd

Cherrybrook ,
NSW ,
2126
Australia

(02) 8078 6604

High Pressure Cleaning: General Advice

pressure cleaning, pressure washing No Responses »

Apr 012010

Most people are extremely proud of their houses and like to keep their property looking clean and tidy all year round. But it is not easy to maintain the exterior of your home and keep it free from dust and dirt. The external elements such as dirt, grease, grime and mold adhere firmly to the sidings, patios, fences and other exterior surfaces of your home. And it’s almost impossible to clean these exterior surfaces on your own. Hence, it’s better to call professionals to do this job who employ high pressure cleaning.

Now what is high pressure cleaning? By high pressure cleaning we refer to the combined use of water and pressure to clean exterior surfaces. Water is released at very high pressure to literally blast off dirt and debris embedded on the buildings and other surfaces. You can use this type of cleaning method for brick cleaning, patio cleaning, driveway cleaning and garage cleaning. Cleaning pavers, sidewalks, walkways, decks, fences, boundary walls, and vehicles is all made possible and easy with pressure washing. Brick, concrete, sandstone, wood, tiles – all these materials can be cleaned easily and magnificently with the pressure cleaning method.

You will find several pressure cleaning machines available in the market, ranging from domestic to commercial and having different pressure measurements. Pressure is measured in pounds per square inch or psi in short. You can also find a whole range of accessories to compliment your machine.

Some general cleaning tips include:

- Before you decide to call in the pressure cleaning professionals, you need to check the water restrictions of your area. In some states pressure washing is considered illegal!

- Make sure that the property is cleaned with a long handled broom, to sweep away any loose stones, dead twigs, etc. These objects can become airborne with the force of the water and strike a person causing bodily injury.

- Always make sure to repair any broken window panes and fix loose boards. You wouldn’t want the additional expense of water damaged furniture and fittings.

- You need to clear the area of all electrical wires and connections to avoid short circuits and electrical shocks.

- Clear all your furniture and accessories from each room, moving them to the far side. Cover with plastic sheets for additional protection.

- Holding the pressure washer too close to the surface can peel off the paint, a safe distance should be maintained at all times.
- The use of chemicals speeds up the pressure cleaning process and removes stains instantly. When using detergents or other cleaning agents make sure they are of the biodegradable kind and environmentally friendly as well.

- Using excessive pressure is not always necessarily the best method of pressure cleaning nor is it the quickest. Excessive force only serves to damage surfaces. Pressure of 2500 psi is more than sufficient to clean most surfaces.

Pressure cleaning can also be used for cleaning gutters. No more climbing on the ladders and hanging precariously onto the gutter edges while trying to clean it with one hand!

Thus, these are some of the main tips to be considered when using the pressure cleaning method to spruce up your home.

Types And Services Of Pressure Cleaning

pressure cleaning, pressure washing No Responses »

Apr 012010

Pressure cleaning is also termed as hydrocleaning, waterblasting, and high pressure cleaning. In this process, water is propelled at very high speeds targeting surfaces and materials. By the right use of pressure and focus, hydrocleaning can remove not only dirt, moss, algae, dust, grime, oil and grease deposits, etc. but also takes away paints from walls and metals, rubber from airfield runways, membranes and sealants from concrete surfaces, and gum and other sticky materials from sidewalks without much difficulty.

The pressure cleaning operations are classified into four categories for standard cleaning and surface preparations. The specifications of these classifications had been structured by the Steel Structures Painting Council or SSPC. The definitions of pressure cleaning using the technology of water jetting are as follows.

Low pressure cleaning is conducted with water pressure lesser than 5,000 psi or 34 MPa
High pressure cleaning is done with water pressure that is between 5,000 and 10,000 psi or 34 and 70 MPa
High pressure water jetting is using water pressures in the range of 10,000 to 25,000 psi or 70 to 170 MPa
Ultra high pressure water jetting is escalating the water pressure to above 25,000 psi or 170 MPa

Pressure Cleaning of Buildings and Living Area Surfaces

The most common among the above four categories of pressure cleaning is low pressure cleaning and high pressure cleaning, which are used to clean or remove dust, dirt, grime, mud, mould, mud, etc. from surfaces and objects like residential and commercial buildings, factory buildings and surfaces, and concrete roads. Normally, pressure cleaning equipments are rented for such cleaning operations by hiring professional pressure cleaning service providers. These organizations use pressures between 750 psi and 30,000 psi but for normal cleaning of buildings and surfaces, pressures less than 5,000 psi are widely used to protect the structures from damage by the cleaning process itself.

The pressure washing of buildings is done with special pressure washer equipment that contains a motor driving a water pump, a specially designed high-pressure hose and a trigger switch. The pump can draw only that much water available in the water source the equipment is connected to. Hence, the pressure cleaning technicians initially estimate the amount of water required to clean a particular area of surface and arrange for the necessary level of water source. Otherwise, the pump will become starved of water, run on dry mode and get damaged.

The nozzles used for various types of cleaning also differ according to the required pressure level and the extent of dirt or grime that had accumulated on the surface. The pressure and pattern of water spraying is controlled by the nozzle and the type of application. Certain nozzles emit jets of water in triangular patterns, while others eject pencil-thin jets. The first type of nozzle is used for cleaning larges surfaces, while the latter type of nozzle is used effectively to reach deep crevices and other spots that are not easily approachable.

Pressure washers are classified by the kind of fuel or energy consumed by them. The major types of pressure cleaning equipment are

Electric pressure washers
Petrol pressure washers
Diesel pressure washers
Gas pressure washers
Propane pressure washers
Hydraulic high pressure washers
Ultra high pressure washers
High pressure steam cleaners

Nearly all these pressure washers are designed to use ordinary water or water mixed with detergents or chemicals for effective and efficient high pressure cleaning. Such detergents, chemicals, hot water and steam are used to loosen oil and grease, as well as other sticky substances on the surface and clean them properly.

The most common pressure cleaning applications for buildings and structures are brick cleaning, concrete cleaning, cleaning pavers, driveway cleaning, pressure cleaning of patios, verandas, footpaths, walkways, fences and poolside areas. Each type of cleaning will require exact amount of water pressures to be used. Lesser pressure will result in improper and incomplete cleaning, while excessive water pressure can cause irreparable damage yo the structures. As such, pressure cleaning and high pressure cleaning must be undertaken only by professional pressure cleaning experts.

Further, the pressure washers are dangerous equipments. They are capable of removing flesh from human body and expose the bones if water pressure exceeds certain levels and the water jet accidentally hits human skin. Further, gas or propane operated pressure washers can ignite in closed chambers and wreak havoc. Such type of pressure cleaning techniques are more suitable for outdoor cleaning purposes, where the risk of fire will be less and mobility will be higher where electrical connections are not available.

Ultra high pressure cleaning is used in industrial and outdoor cleaning requirements where heavy level of cleaning or preparation of surfaces for certain specific applications is needed. Membranes such as rubber, urethane, elastomeric membranes and hot applied membranes, as well as paints in highways, airfield runways, metal surfaces and parking surfaces are removed through these high pressure cleaning processes. The same technology is also used on various types of surfaces that had been dirtied by graffiti, pollution, sticky materials such as gum, etc.

One of the most important high pressure cleaning methods used with maximum effect is on commercial and military airfield runways. The landing strips of planes need to maintain fixed levels of friction to avoid skidding of the planes when they land. Constant landing of planes on the strips tend to increase the level of rubber on the surfaces due to the sticking of such rubber from the plane tires. Such excess rubber must be removed regularly to restore the exact friction levels. High pressure cleaning is the most effective process in achieving this and ensuring safe landing of planes on airstrips.

From the above, it must be clear that pressure cleaning and high pressure cleaning are the work of highly trained and experienced professionals. We have imparted special training to our technicians and use only pressure washers and other pressure cleaning equipment that are maintained in very good condition to ensure perfect cleaning and avoid damages or other types of risks. Contact us to know more about pressure cleaning to keep your buildings clean and grime free, with a fresh, new look.

Older Entries Newer Entries